Small footprint dc speed controller for permanent magnet or shunt wound motors up to 0.55KW.
Easily adjustable parameters include minimum and maximum motor speed, armature current, acceleration rate and IR compensation.AC supply input selection for international mains voltage compatibility.
For DC motors rated up to 3.7 amps
Selectable dual international voltage supply 110/240v ac50/60Hz
Integral AC supply fuse
Compact footprint
Remote stop/start signal input facility
Adjustable current overload protection
Tachogenerator or armature voltage speed feedback
Adjustable acceleration rate between 1 and 20 seconds
Adjustable IR compensation for improved AVF speed regulation
Infinitely variable speed adjustment via remote potentiometer
Sophisticated dual loop control
Drive run input
Electronic soft start
Dimensions 100 x 100 x 42 (mm), 4" x 4" x 1.6"
Suitable for permanent magnet, shunt wound or universal motors
Robust screw terminals
Low voltage 30/60V AC supply version available for 24/48V DC motors
Rating table
AC Supply Range
Typical Armature Voltage
Max Continuous Armature Current
Nominal Power
90 to 120v
90v
3.7A
0.25KW
0.35HP
200 to 264v
180v
3.7A
0.55KW
0.7HP
Betech 100pt Ltd
Registered Office Four Square Buildings
Thomas Street Heckmondwike England WF16 0LS
Vat GB 461 3067 67 Registration No 2404937
