Betech 100 PT - Warner Electric Main Stockist

Adjustable Torque Control for Soft Start-Stop

The full range of Warner Electric's offering of Adjustable Torque Controls are shown by scrolling down this page.

Warner Electric's Adjustable Torque Controls provide soft starting and stopping functions. The torque transmitted by a clutch or brake is proportional to the coil current. Warner Electric offers several models that provide full range torque control for smooth and repeatable starts and stops. All adjustable torque controls can be used with electrically released brakes.

Integral/Conduit Box Mounted Controls

MCS-103-1 Series
Adjustable Torque Control The MCS-103-1 is an enclosed control complete with a cover and mounting provisions. It operates up to four units, two at a time. The external

wiring is connected to the terminal strip located behind the cover.

CBC-200 Series
Dual Channel, Single Torque Adjustable The CBC-200 is a dual channel control with one adjustable current and one fixed voltage. Switch selection tunes the control to exactly match power requirements and operating characteristics of each clutch or brake. Individual torque adjustment allows preset maximum torque tailored to the application's

requirements. The adjustable torque channel can be used with an electrically released brake.

CBC-300 Series
Dual Channel, Dual Torque Adjustable The CBC-300 has two adjustable current channels. Switch selection tunes the control to exactly match power requirements and operating characteristics of each clutch or brake.

Individual torque adjustment allows preset maximum torque tailored to the application's requirements.

Panel Mounted Controls

CBC-500 Series
Dual Channel Torque Adjustable The CBC-500 is a dual channel adjustable voltage control with optically isolated input switching for 24 and 90 volt electric clutches and brakes. These controls can be set up to

energize the two outputs alternately (single) or simultaneously (dual).

CBC-550 Series
Dual Adjustable with Power Transformer The CBC-550 is a dual channel adjustable voltage control with optically coupled switching for 24 and 90 volt electric clutches and brakes. These controls can be set up to energize the two outputs alternately (single) or simultaneously (dual).

The CBC-550 has a power transformer which will operate with a 120, 220, 240, 380, or 480 VAC input.