|
On-Off Controls for Basic Start-Stop |
The full range of Warner Electric's offering of On-Off Controls are shown by scrolling down this page.
For more detailed information on each model click on the button and you will be shown the PDF data page from our sensor catalog.
|
| |
|
Warner Electric's On-Off Controls provide basic starting and stopping functions for use with one or two clutch/brake units. They are available for conduit box, octal socket, or panel mounting applications. |
| |
|
Integral/Conduit Box Mounted Controls |
| |
CBC-100 Series
Single Channel Capacity
The CBC-100 mounts inside a standard Warner Electric conduit box and includes rectification and suppression circuits. |
|
|
| |
CBC-150 Series
Dual Channel Capacity
The CBC-150 replaces the cover on the standard module conduit box. Provides rectification and suppression for two devices. Green LED indicates power to clutch. Red LED indicates power to brake. |
|
|
| |
CBC-160 Series
Electrically Released Brake Control
The CBC-160 clutch/brake control provides a single 90 VDC adjustable output for use with any clutch/brake unit. The adjustable output will provide consistent and repeatable release for Warner Electric's 90 VDC permanent magnet electrically released brakes. The CBC-160 mounts as the cover on the standard module conduit box. |
|
|
The 160-1 accommodates 120 volts A.C. motors, while the power to the 160-2 control can come from either a 230 volt or 460 volt A.C. motor. Customer-provided switching is accomplished through the motor starter on the A.C. input. This allows convenient retrofit of spring-set style motor brakes and inexpensive installation of new applications. |
|
| |
|
Plug-In Octal Socket Controls |
| |
CBC-801 Series
Multi-Unit Capacity
The CBC-801 is a basic on-off power supply that provides full voltage to a 90 volt clutch or brake and is activated by an external switch. The CBC-801 is a plug-in power supply, which is used with an octal socket (purchased separately). The CBC-801 will operate two units separately, or simultaneously. |
|
|
| |
CBC-802 Series
PLC Compatible
The CBC-802 is a power supply with solid state circuits for load switching. A brake and clutch may be operated separately - or, two brakes or two clutches, one unit on at a time. The CBC-802 mounts on an octal socket (purchased separately), and the wiring connections are made at the socket terminals. |
|
|
| |
|
Panel Mounted Controls |
| |
CBC-400 Series
Dual Channel Control
The CBC-400 is a basic on-off control which supplies 24 or 90 VDC for electric clutch/brake operation. They offer optically isolated switching inputs for start, stop, and emergency stop (E-stop). These controls can be set up to operate the two outputs alternately (single) or simultaneously (dual). |
 |
|
| |
CBC-450 Series
Dual Channel Control with Transformer for Variable Input Voltage
The CBC-450 is a basic on-off control which supplies 24 or 90 VDC for electric clutch/brake operation. It offers optically isolated switching inputs for start, stop, and emergency stop (E-stop). These controls can be set up to operate the two outputs, alternately (single) or simultaneously (dual). The CBC-450 has a power transformer which will operate with a 120, 220, 240, 380 or 480 VAC input. |
|
|
| |
